CategoryAndroid

Posts about Android stuff… development, news, etc…

JSON vs XML – Part 1: Data Size

In this test to compare XML vs JSON files data size, I transformed a sample of our XML data files to JSON, and I’ve obtained the following results:

File Name XML Size (bytes) JSON Size (bytes) Difference (bytes) Difference (%)
groups 6.218 3.379 – 2.839 -45.6 %
matches 14.541 8.823 -5.718 -39,3 %
scorers 1.250 652 -598 -47,8 %
TOTAL/Average 22.009 12.854 -9.155 -41,6 %

Well, after this first experiment it seems that I can save about 41,5 % on my data size if I change from XML to JSON files.

But wait! And if I reduce my tag/field names’ length to only 2 characters long?

Here are the new results that I obtained after that change…

File Name XML Size (bytes) JSON Size (bytes) Difference (bytes) Difference (%)
groups 3.444 2.934 -510 -14,8 %
matches 8.189 7.154 -1.035 -12,6 %
scorers 756 556 -200 -26,5 %
TOTAL/Average 12.389 10.644 -1.745 -14,1 %

Well, that size difference becomes reduced from near 41,5% to about 14%! It seems that with JSON I can save at least almost 2 KB per App update.

If I have 1.000 updates/day it gives less 2 MB of bandwidth which is perfectly negligible.With 1.000.000 updates/day it gives 2 GB/day, which becomes about 60 GB/month. It’s true that can save me some bucks if I’m paying a non unlimited bandwidth hosting service. But maybe it isn’t sufficient to make me change my App, specially if it doesn’t will make my App to be implemented faster and run significantly better.

By the way, until I publish the next post “JSON vs XML – Part 2: Parsing and Display Speed“, I recommend that you read an interesting article from Nicholas C. Zakas, which I found among many other articles about XML vs JSON: “Is JSON better than XML?“.

It compares several aspects of those two technologies in a succinct way.

Note: This is the first post of the “JSON vs XML – Data Size, Parsing and Display Speed” set.

JSON vs XML – Data Size, Parsing and Display Speed

In my previous post “App Interface and Data Update with UIWebViews, XML, XSLT and HTML“, I’ve written a little bit about how I have used XML to dynamically update and display our App’s data.

Following that, now that I’m preparing a new similar App, I’ve read lots of stuff about JSON and about JSON vs XML on the web, which is making me to consider the change of XML by JSON.

Many people argues that JSON is better than XML but that’s not clear and it seems that it depends a lot in what we need to do! Well, I know that’s not something new, it’s what happens most of the times when we’ve to choose some technology against other(s).

But I want to choose the “best” for my case, since I have plans to port this new App at least to Android OS and maybe to Windows Phone 7. And if that choice can reduce my total work in those platforms, it’ll be an important choice.

In general what I’ve seen is that XML is largely supported in all common browsers and in those mobile platforms. JSON is relatively new, however it’s becoming supported almost everywhere but mostly without native parsers.

That’s the case with iOS and WebKit (Safari’s engine). So I decided to do some previous experiments…

Since this article is growing a little more than I preview, I’ll publish the results of my tests in the following posts:

Why the hell (Android) App Inventor is ONLY for amateurs / no developers!?

Update Note (March 14, 2012):

Google has discontinued App Inventor on December 31, 2011. Fortunately, it’ll now be maintained and evolved by MIT which has already relaunched it’s new beta version. You can check it at: “http://appinventoredu.mit.edu“.

In a near future, unlike Google’s version, I hope that MIT will let us export the source code of our apps created with App Inventor, and then continue it’s development on an IDE, like a usual Android app.


Original Article:

Today I decided to play a little bit with App Inventor for Android

I already knew that App Inventor has some limitations, for instance, currently it can’t be used to develop multiple screen apps. But that’s ok if your App doesn’t need to use those unavailable features.

I was thinking to try App Inventor and if I’d like it, maybe I could use it to create the base/core of some Apps. Then I’d export those Apps code to continue their development with Eclipse and Android SDK.
In this way I supposed that I’d be able to overcome those App Inventor restrictions, as far as I didn’t need to get my App back to App Inventor again.

So, after setting up my system (Mac + Android phone) I’ve started the first tutorial, Hello Purr. Below you see an App Inventor screen-shot with this tutorial App.

Figure 1: App Inventor - Hello Purr Tutorial

I was quite happy with App Inventor, specially with its Block Editor which is very interesting, specially because we can visually build Apps without writing on line of code! 🙂
It’ll certainly allow some non developers (and not only, I hope) to create their first Apps and it may motivate some of them to go further away and start learning how to program.

Figure 2: App Inventor - Block Editor

Kudos for Google folks by, as they say on the site, having reused the Open Blocks Java library (for creating visual blocks programming languages) distributed by the MIT’s Scheller Teacher Education Program which derives from thesis research by Ricarose Roque.

I’ll not describe blocks here but if you want to know more about it, take a look at the App Inventor Blocks Reference.

This is really great and I think that in a few years, much of the code programming (if we still can call it that, then) will be done with tools like Block Editor.

Now, let’s return to the topic of my post…
After happily hear the meoowww 🙂 of my tutorial cat on my phone, I was already thinking how it would be nice to use App Inventor to start porting our next iPhone App to Android.

But, then in the FAQs I realized that I can’t do it in the way I want, without being limited to the App Inventor features:

Can I develop in App Inventor and export the source code to Eclipse or some other IDE to work on it further?

No, App Inventor does not generate Java source code.”
(from: http://appinventor.googlelabs.com/learn/userfaq.html)

🙁

Well, I hope Google will reconsider it…
What do you think?

Do you think Google is right by not allowing the export of those App’s code, targeting App Inventor only to “amateurs” as I called it (with no pejorative intention) to designate non programmers which want to start creating their Apps?

Let me know what you think…

Interesting Stats about iPhone/Android Apps Business Market

If you develop Apps for mobile devices, whether it be iPhone, Android, Blackberry, Microsoft or other smartphones/tablets, don’t miss to see those interesting stats/charts:

There you can get some precisous information, like:

  • the most popular Apps categories;
  • the free/lite version app conversion rates to paid versions, by platform;
  • the ads reaction by users age profiles;
  • and much more…

Category of apps used in the past 30 days

Source: Nielsen @ Business Insider

You have great ideas for mobile Apps? …but you don’t code?

You have great ideas for mobile Apps? You’d like to develop those ideas but don’t know how to program?

Now you can do it!!

Transform your ideas into real Apps for your Android phone, with Google App Inventor: http://appinventor.googlelabs.com.

I haven’t tried it yet but I think that for us, developers,it can be a very interesting tool because it allows us to sketch our Apps more faster. And it can be even better, if it allows us to take that sketch App code, and put it in the traditional pipeline, using Eclipse or other IDE to develop more advanced features.

Share your ideas with me, write a comment here…

© 2024 myDevNotes

Theme by Anders NorénUp ↑